Hit Factor Shooting Supply LLC
info@hitfactorshooting.com

Hit Factor Shooting Supply LLC


The Original Shellplate Bearing Kit - Shellplate Bearing Kits for Dillon Reloading Presses

These kits were featured in the Nov./Dec 2011 issue of Front Sight magazine.

  • Premium Shellplate Bearing Kit for Dillon Super 1050 $20.95 Free shipping in U.S.A.
    Premium Shellplate Bearing Kit Dillon Super 1050 adds a roller bearing on top of the shellplate to reduce powder spilling as the shellplate snaps into position.  Run out is eliminated and this results in more consistent ammo. It replaces screws with thumbscrews to speed up the adjustment of the press. Premium kit includes the very popular Shellplate Bearing Kit, thumbscrews for 3 powder measures and 3 powder measure adjustment knobs. This kit works with both new and old style powder measures.

    If you have the older, shorter stroke RL1050 or 1050: Send your lock ring to us to machine. We will remove the thickness of the bearing from the bottom of the lock ring. We also have new lock rings, machined and ready to ship. See our homepage at Hit Factor Shooting Supply, LLC to purchase.

    Very detailed and complete instructions are included with the kit. If you have any problems send me an email and I will call to help you finish the setup.

    Dillon recently changed the primer alarm screw to a phillips head sheet metal type screw. if you have this new style primer alarm the thumb screw we provide will not fit and it may be repurposed (tension screw for kydex holsters).

    UPC 726670170781


    Premiuim 1050 Kit1050 Shellplate KitLMDB installed1050 kit installedPowder MeasurePowder KnobPrimer



  • Shellplate Bearing Kit for Dillon Super 1050 $11.95 Free shipping in U.S.A.
    Shellplate Bearing Kit Dillon Super 1050 adds a roller bearing on top of the shellplate to reduce powder spilling as the shellplate snaps into position. Run out is eliminated and this results in more consistent ammo.

    If you have the older, shorter stroke RL1050 or 1050: Send your lock ring to us to machine. We will remove the thickness of the bearing from the bottom of the lock ring. We also have new lock rings, machined and ready to ship. See our homepage at Hit Factor Shooting Supply, LLC to purchase.

    Very detailed and complete instructions are included with the kit. If you have any problems send me an email and I will call to help you finish the setup. UPC 701748865721

    1050 Kit1050 Shellplate KitLMDB installed1050 kit installed



  • Ultimate Bearing Kit for Dillon XL 650 $37.95 Free shipping in U.S.A.
    Ultimate Bearing Kit Dillon XL 650 adds a roller bearing on top of the shellplate to reduce powder spilling as the shellplate snaps into position.  We also include a Camming Pin Bearing to replace the camming pin. Your press will run as smooth as silk with this kit. Our tough as nails phenolic low mass detent ball is included. Run out is eliminated and this results in more consistent ammo. The bearing also supports the shellplate resulting in better priming. It replaces screws with thumbscrews to speed up the adjustment of the press. Premium kit includes the very popular Shellplate Bearing Kit, thumbscrews for 3 powder measures and 3 powder measure adjustment knobs. This kit works with both new and old style powder measures.

    Our Camming Pin Bearing reduces friction and smooth's the reciprocating action of the case insert slide and slide cam. A special cut allows the casefeed arm to function correctly, there are some older 650s that really benefit from this. All of our camming pins are blued and finished. We match the dimensions of the OEM pin. Our pin fully supports the casefeed arm, reducing vibrations and unnecessary wear. Reduced vibrations helps to keep cases correct side up when using a casefeeder. This is an exclusive feature of our pin, not available from any other manufacturer. 

    Very detailed and complete instructions are included with the kit. If you have any problems send me an email and I will call to help you finish the setup.

    Dillon recently changed the primer alarm screw to a phillips head sheet metal type screw. if you have this new style primer alarm the thumb screw we provide will not fit and it may be repurposed (tension screw for kydex holsters).

    UPC 726670170798

    Ultimate 650 Kit650 bend wire exampleCamming Pin BearingCamming Pin Bearing650 kit installed650 bend wire example650 bend wire exampleLMDB installedPowder MeasurePowder KnobPrimerCPB installedCamming Pin DimensionsCPB installed



  • Camming Pin Bearing Kit for Dillon XL 650 $19.95 Free shipping in U.S.A.
    If you already have one of our shellplate bearing kits this camming pin bearing will upgrade you to our ultimate kit. Your press will run smooth as silk.

    Our Camming Pin Bearing reduces friction and smooth's the reciprocating action of the case insert slide and slide cam. A special cut allows the casefeed arm to function correctly, there are some older 650s that really benefit from this. All of our camming pins are blued and finished. We match the dimensions of the OEM pin. Our pin fully supports the casefeed arm, reducing vibrations and unnecessary wear. Reduced vibrations helps to keep cases correct side up when using a casefeeder. This is an exclusive feature of our pin, not available from any other manufacturer.

    Our tough as nails phenolic low mass detent ball is included.

    Very detailed and complete instructions are included with the kit. If you have any problems send me an email and I will call to help you finish the setup.

    UPC 722589531408

    CPB KitCamming Pin Bearing installedCamming Pin Bearing installedLMDB installedCamming Pin DimensionsLMDB installed



  • Premium Shellplate Bearing Kit for Dillon XL 650 $18.95 Free shipping in U.S.A.
    Premium Shellplate Bearing Kit Dillon XL 650 adds a roller bearing on top of the shellplate to reduce powder spilling as the shellplate snaps into position.  Run out is eliminated and this results in more consistent ammo. The bearing also supports the shellplate resulting in better priming. It replaces screws with thumbscrews to speed up the adjustment of the press. Premium kit includes the very popular Shellplate Bearing Kit, thumbscrews for 3 powder measures and 3 powder measure adjustment knobs. Our tough as nails phenolic low mass detent ball is included. This kit works with both new and old style powder measures.

    Very detailed and complete instructions are included with the kit. If you have any problems send me an email and I will call to help you finish the setup.

    Dillon recently changed the primer alarm screw to a phillips head sheet metal type screw. if you have this new style primer alarm the thumb screw we provide will not fit and it may be repurposed (tension screw for kydex holsters). 

    UPC 726670170798

    Premiuim 650 Kit650 bend wire example650 kit installed650 bend wire example650 bend wire exampleLMDB installedPowder MeasurePowder KnobPrimerCam screw




  • Shellplate Bearing Kit for Dillon XL 650 $9.95
    This kit eliminates the snap when the shellplate advances to the next position. When the shellplate snaps, gunpowder splashes out of the casing causing a mess on your press and inconsistent loads.  Run out is eliminated and this results in more consistent ammo. Our tough as nails phenolic low mass detent ball is included. This kit also smooth's out the operation of your press. No permanent alteration of the press is necessary. Many users report more consistent and easier primer seating.

    The diagram shows the pieces that come in the kit - two high quality hardened steel thrust races and one needle bearing. The bearing pack installs on the shellplate bolt. Detailed instructions with photos are included. This will not affect the seating depth of primers or require die adjustments. UPC 720825758213

    Shellplate Bearing Kit650 bend wire exampleKit installed650 bend wire example650 bend wire exampleLMDB installed




  • Premium Shellplate Bearing Kit for Dillon RL 550 B $29.95 Free shipping in U.S.A.
    Premium Shellplate Bearing Kit Dillon RL 550 B replaces the index sprocket with a modified sprocket that has the room required to install the shellplate bearing kit.  Run out is eliminated and this results in more consistent ammo. The bearing kit smoothest the action of the press, reducing powder spillage and increasing tactile feel while priming. Our tough as nails phenolic low mass detent ball is included. Priming operation will be more consistent. Thumbscrews replace bolts to speed up the adjustment of the press. Thumbscrews for 3 powder measures and 3 powder measure adjustment knobs. This kit works with both new and old style powder measures.

    This kit has a much tighter feel compared to our Bearing and Quick Adjust Kit for Dillon 550B. You can feel the primer seating easily. If you need the best quality ammo (minimal run out) kit may be better for you.

    Very detailed and complete instructions are included with the kit. If you have any problems send me an email and I will call to help you finish the setup.

    Dillon recently changed the primer alarm screw to a phillips head sheet metal type screw. if you have this new style primer alarm the thumb screw we provide will not fit and it may be discarded. UPC 726670170804

    Premiuim 550 KitShellplate Bearing RL550B550 Shellplate KitLMDB installedPowder MeasurePowder KnobPrimer




  • Shellplate Bearing Kit for Dillon RL 550 B $20.95 Free shipping in U.S.A.
    Shellplate Bearing Kit Dillon RL 550 B replaces the index sprocket with a modified sprocket that has the room required to install the shellplate bearing kit.  Run out is eliminated and this results in more consistent ammo. The bearing kit smooth's the action of the press, reducing powder spillage and increasing tactile feel while priming. Priming operation will be more consistent. (shellplate bolt not included)

    Very detailed and complete instructions are included with the kit. If you have any problems send me an email and I will call to help you finish the setup. UPC 720825758206


    Shellplate Bearing RL550BShellplate Bearing RL550B550 Shellplate Kit installedLMDB installed




  • Bearing and Quick Adjust Kit for Dillon RL 550 B $15.95 Free shipping in U.S.A.
    Thrust Bearing and Quick Adjust Kit for Dillon RL550B replaces screws and bolts with thumbscrews to speed up the adjustment of the press. This kit includes the engineered shellplate thrust bearing, thumbscrews for 3 powder measures and 3 powder measure adjustment knobs. This new configuration works with both new and old style powder measures.

    This kit has a much softer feel compared to our Premium Shellplate Bearing Kit for 550B. If you are pretty tough on your equipment or you just want to make a lot of range fodder without much fuss this kit may be better for you.

    Very detailed and complete instructions are included with the kit. If you have any problems send me an email and I will call to help you finish the setup.

    Dillon recently changed the primer alarm screw to a phillips head sheet metal type screw. if you have this new style primer alarm the thumb screw we provide will not fit and it may be repurposed (tension screw for kydex holsters).

    UPC 720825758190


    Bearing and Quick Adjust Kit RL 550 BLMDB installedPowderKnobPrimer




  • Ultimate Shellplate Bearing Kit for Dillon SL 900 $29.95 Free shipping in U.S.A.
  • Ultimate Bearing Kit Dillon SL 900 adds a roller bearing on top of the shellplate to reduce powder spilling as the shellplate snaps into position.  We also include a Camming Pin Bearing to replace the camming pin. Your press will run as smooth as silk with this kit. Run out is eliminated and this results in more consistent ammo. The bearing also supports the shellplate resulting in better priming. It includes 2 powder measure adjustment knobs . This kit works with both new and old style powder measures. The kit also includes our tough as nails phenolic low mass detent ball.

    Our Camming Pin Bearing reduces friction and smooth's the reciprocating action of the case insert slide and slide cam. All of our camming pins are blued and finished.

    Very detailed and complete instructions are included with the kit. If you have any problems send me an email and I will call to help you finish the setup.

    Bending of the ejector wire is required, see picture with an example of how to bend. Are FAQ has additional info about bending ejector wires.

    UPC 722589531385


    Ultimate Kit for SL 900bearing kit installedCamming pin bearing installedLMDB installed900 bend wire example 900 bend wire example 900 bend wire example

  • Squib Rods - Solid Brass
    Choose Size
    Our squib rods are precision turned from solid brass stock for specific calibers. Each rod will fit well into the barrel allowing the full force to be directed at the stuck squib (bullet).

    These rods are heavy enough that you may not need a hammer, who wants to carry a hammer in their range bag?

    Don't let a squib ruin your day at the range. Every shooter and Range Officer should have these in their kit.

    We made these a few years ago and we still receive request for these, so why not? We started up production again.

    We have two rods available for the most popular calibers 9mm/.357/.38/.40 for up to 8.5" barrels and .44/.45  for up to 8.5" barrels.

    tension screws


  • Kydex Holster Tension Thumbscrews $1.95
    These screws are 8 x 32 and will fit Blade-Tech, Uncle Mikes, Blackhawk and many other brands of kydex holsters. Use these screws to adjust the tension of kydex holsters. For 3 Gun you want the pistol held nice and snug. For USPSA or IDPA a loose, fast draw is preferred. The last thing a competitor needs is a pistol falling out of the holster - it usually means a DQ! The kit consist of 2 screws.

    tension screwstension screws installedtension screws installedtension screws installed


  • Extra Powder Knob/Label & Powder Measure Thumb Screws $5.50
    One powderr adjustment knob, two washers and clamp screws and a label.


International Orders Accepted. Shipped via USPS

International customers please note: You are responsible for duty and any other import fees levied by your country. Estimated delivery date does not account for the amount of time the package takes to clear customs. Italy is taking 4-6 weeks for delivery.

If you would like to pay with personal check or money order, simply mail your order to us. Our address is in the Contact tab at the top of this page.

Our Guarantee

  1. If you are not completely satisfied with your bearing kit, simply return it for a full refund.
  2. Yep, it's that easy.